Filter
Top Products
FIGURE 12
STEP 12:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to
the SEAT FRAME using one 3/8 X 4-1/2” BOLT (12), two 3/8” FLANGE SPACERS (15), two 3/8 X 1” SPACERS (14) and one 3/
8” LOW HEIGHT LOCK NUT (13) as shown in FIGURE 12. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 4-1/2” 12
5
4
13
15
MAIN ARM
FIGURE 13
STEP 13:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5)
to the MAIN ARM using one 3/8 X 2-3/4” BOLT (10), two 3/8” FLANGE SPACERS (15) and one 3/8” LOCK NUT (8) as
shown in FIGURE 13. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 10
5
4
8
15
3/8” LOW HEIGHT
LOCK NUT
11
14
SEAT FRAME