Filter
Top Products
10
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 11
STEP 11:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (9) and one 3/8” LOCK NUT (8) as shown in FIGURE 11 . Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 9
5
4
8
SEAT FRAME
FIGURE 10
STEP 10:
12
SEAT FRAME
• SECURELY attach the BRACKET (from 100 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-1/2” BOLTS (12), two 3/8”
WASHERS (7), and two 3/8” LOW HEIGHT LOCK NUTS (13). See FIGURE 10.
3/8” LOW HEIGHT
L0CK NUT
7
13
BRACKET
3/8 X 4-1/2”