Filter
Top Products
10
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 12
STEP 12
• Attach one 3-1/2” PULLEY (4) to the FRONT LEG (1) and one 3-1/2” PULLEY (4) to the BASE CONNECTION (3) using two 3/8 X
2” BOLTS (10), four 3/8” WASHERS (8) and two 3/8” LOCKNUTS (9). (Note: Make sure CABLE (14) is running under
PULLEYS.)
FIGURE 13
STEP 13
• Screw the threaded end of LEG PRESS CABLE (14) to the
PULLEY BRACKET (2) as shown in FIGURE 13.
2
14
14
1
10 3/8 X 2”
3
4
9
8