NordicTrack NTL2495.2 Treadmill User Manual


 
29
HOW TO MOVE THE TREADMILL
1. Unplug the power cord.
2. Hold the treadmill with your hands in the location shown
by the arrow at the right.
CAUTION: To decrease the
possibility of injury, bend your legs and keep your
back straight. As you raise the treadmill, make sure to
lift with your legs rather than your back.
3. Push the the treadmill to the desired location. To reduce
the risk of injury, use extreme caution while moving
the treadmill.
4. Carefully lower the treadmill until it is resting on the floor.
Wheels
Press the Stop button again and restore the
console to the factory settings if desired.
When the Stop button is pressed, the words
“Restore to Factory Settings” will appear on the
s
creen. If you wish to erase all settings that users
A, B, C, and D have saved, press the Start button.
The words “Are You Sure?” will then appear on
the screen. To confirm that you wish to erase the
settings, press the Save button. The console will
then be restored to the factory settings.
Remove the key from the console to exit the
information mode.
When the key is removed, the information mode
will be exited.
5
4