Filter
Top Products
6. 6
Withthehelpofasecondperson,holdthecon-
soleassemblyneartheLeftUpright(89).
ConnecttheUprightWire(84)totheconsole
wire.Seetheinset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Console
Assembly
Console
Wire_
84-__
Wire 84_
Tie_t!I
Console
Wire
----89
.
Insert the wires into the Left Upright (89) as you
set the console assembly on the Left Upright
and the Right Upright (90). Be careful not to
pinch the Upright Wire (84).
Attach the console assembly with four 5/16" x
1 1/2" Bolts (5) and four 5/16" Star Washers
(10). Start all four Bolts, and then tighten
each of them.
7
Console
Y
9