Filter
Top Products
10. Make sure there is a piece of cardboard below
the rear of the Frame (56).
iMPORTANT: See page 14 and plug in the
power cord. Next, see page 16 and turn on
the power.
Then, press the 0 percent incline button.
When the Frame (56) stops moving, remove
the key from the console and unplug the
power cord.
10
56
iMPORTANT: Make sure
to follow all instructions
in this step
Cardboard
11. iMPORTANT: Before you begin this step,
make sure that you have read and followed
all the instructions in step 10.
Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (11).
Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (11). Note: It may be necessary to move the
Frame (56) back and forth to align the Storage
Latch with the Base.
11 °/
Latch
Knl
Large
Barrel
97
11
11