Filter
Top Products
12
H
OW TO TURN ON THE POWER
Plug in the power cord (see page 10).
Locate the reset/off cir-
cuit breaker on the
t
readmill frame near
the power cord. Make
sure that the circuit
breaker is in the reset
position.
Stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing on page
11) and attach the clip securely to the waistband
of your clothes. Next, insert the key into the con-
sole. After a moment, the display will light.
Test
the clip by carefully taking a few steps back-
ward until the key is pulled from the console. If
the key is not pulled from the console, adjust
the position of the clip as needed.
HOW TO USE THE MAIN MENU
The console’s main menu allows you to view informa-
tion and to enter settings before you begin exercising.
Follow the steps below to use the main menu.
Press the Menu button.
When the Menu button is pressed, the main menu
will appear in the display. The main menu in-
cludes four options: ODOMETER, SELECT
USER, USER SETUP, and TREADMILL SETUP.
To view the odometer, see step 2. To designate
yourself as User 1 or User 2, see step 3. To
enter user information, see step 4. To change
console settings, see step 5.
To highlight options
within the main menu,
p
ress the up and down
arrow buttons beside
t
he Menu button.
View the Odometer.
Highlight the word ODOMETER in the main menu
and then press the Enter button.
When the Enter button is pressed, the display will
show the total number of miles run by User 1 and
User 2 since the treadmill was purchased. The
display will also show the trip distance—the dis-
tance run during a recent period of time, such as
the most recent month—for User 1 and User 2. To
reset the trip distance, first highlight USER 1 or
USER 2 and press the Enter button. Then, high-
light NO or YES and press the Enter button.
To reselect the main menu, highlight EXIT and
then press the Enter button.
Designate yourself as User 1 or User 2.
The console can keep track of information and
save settings for two different users. Highlight the
words SELECT USER in the main menu and then
press the Enter button.
To identify yourself as User 1 or User 2, highlight
USER 1 or USER 2 and then press the Enter but-
ton.
The console can automatically prompt you to
identify yourself as User 1 or User 2 each time
you insert the key into the console. Highlight the
words SELECT USER in the main menu and then
press the Enter button. Next, highlight USER DIS-
PLAY OPTIONS and press the Enter button. Next,
highlight PROMPT FOR USER and press the
Enter button. Then, highlight NO or YES and
press the Enter button.
The console can also display a welcome message
each time you insert the key into the console.
Highlight SHOW USER WELCOME and press the
Enter button. Then, highlight NO or YES and
press the Enter button.
To reselect the main menu, press the Menu button
twice.
3
2
1
3
2
1
Reset
Position