Filter
Top Products
9
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
C
onnect the Upright Wire Harness (75) to the
Console Wire Harness (71). See the inset draw-
i
ng. The connectors should slide together
easily and snap into place. If they do not, turn
one connector and try again. IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON. Remove the wire
tie from the Upright Wire Harness.
71
Console
A
ssembly
4
75
Wire
Tie
74
5. Connect the TV Cable (49) and the AV Wire
(97) to the cables extending from the console
assembly. Then, insert the connectors down into
the Uprights (73, 74).
Next, insert the brackets on the Handrail (99) into
the Uprights (73, 74). Make sure that no wires
are pinched.
49
73
97
5
74
99
6. Partially tighten three 3/8" x 1 1/4" Bolts (64)
with three 3/8" Star Washers (90) into the Right
Upright (74). Next, partially tighten three 3/8" x
1 1/4" Bolts with three 3/8" Star Washers (not
shown) into the Left Upright (73). Then, firmly
tighten the six Bolts.
73
74
64
64
90
90
75
6
73
99
71
Console
Assembly