Filter
Top Products
8
2. Identify the Right Upright (74), which is marked
with a “Right” sticker. Hold the Right Upright
near the Right Base Cover (77). See the inset
d
rawing. Locate the wire tie in the rectangular
hole in the lower end of the Right Upright. Tie
t
he wire tie securely around the end of the
Upright Wire Harness (75). Then, pull the other
end of the wire tie up through the Right Upright
until the Upright Wire Harness is routed com-
pletely through the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base
(83) inside the Right Base Cover (77). Be care-
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)
with two 3/8" x 3 3/4" Bolts (72) and two 3/8"
Star Washers (90). Do not tighten the Bolts
yet. Note: It may be necessary to tip the tops of
the Uprights forward slightly as you thread the
Bolts into the Uprights.
Hold the Left Upright (73) near the Left Base
Cover (76). Pull the TV Cable (49) and the AV
Wire (97) into the rectangular hole in the lower
end of the Left Upright and out of the top of the
Left Upright. Set the Left Upright on the Base
(83) inside the Left Base Cover. Attach the Left
Upright to the Base with two 3/8" x 3 3/4" Bolts
and two 3/8" Star Washers (not shown). Do not
tighten the Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand. Save the card-
board stand for step 9.
83
76
75
Wire
Tie
77
2
74
73
49
9
7
90
72
3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95); the Upright Sleeves
are marked. Slide the Right Upright Sleeve onto
the Right Upright (74), and slide the Left Upright
Sleeve onto the Left Upright (73).
95
“Right”
“Left”
96
3
74
73
75
7
4
W
ire
Tie