Filter
Top Products
10
Collar
Spring
96
73
K
nob
Pin
8. Press the Latch Sleeve (96) into the Left Upright (73). If
necessary, use a rubber mallet to fully insert the Latch
S
leeve.
R
emove the knob from the pin. M
ake sure that the collar
and the spring are on the pin.
Next, insert the pin into
the Latch Sleeve (96) and the Left Upright (69), and
tighten the knob back onto the pin.
8
9. Place the treadmill in the storage position (see HOW TO
FOLD THE TREADMILL FOR STORAGE on page 28).
Next, center the Frame (48) between the Uprights (73,
74). Tighten the Upright Bolts (72) in the lower ends of
the Uprights (73, 74).
73
9
74
48
72
72
10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking
belt (see page 31). To protect the floor or carpet, place a mat under the treadmill.