Filter
Top Products
20
HOW TO CREATE A RECORD PROGRAM
1
.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
2.
Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 12.
3.
Select a Record program.
To select a Record program, press the Programs
button repeatedly until the words RECORD
PROGRAM 1 or RECORD PROGRAM 2 appear in
the display.
If the Record program has not yet been defined,
the display will show a program time of three
minutes. If the program time is more than three
minutes, see HOW TO USE A RECORD PRO-
GRAM on page 21.
Each Record program is divided into one-minute
segments. One speed setting and one incline set-
ting can be programmed for each segment.
4.
Press the Start button to start the program.
A
moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
b
egin walking.
5. Select a display mode and program the desired
speed and incline settings.
When a Record program is selected, the console of-
fers three display modes. Press the Display button
repeatedly to select the desired display mode.
To program a speed setting and an incline setting
for the first one-minute segment of the program,
simply adjust the speed and incline of the treadmill
as desired by pressing the Speed and Incline but-
tons.
When the first segment ends, a series of tones will
sound and the current speed setting and the cur-
rent incline setting will be saved in memory.
Program a speed setting and an incline setting for
the second segment as described above. Continue
programming speed and incline settings for up to
30 segments.
When you are finished with your workout, press the
Stop button twice. The Record program will then be
saved in memory.
6.
When you are finished exercising, remove the
key from the console.
See step 9 on page 15.