Filter
Top Products
8
3. Identify the Right Upright Spacer (91), which is
marked with a “Right” sticker.
S
ee the inset drawing. Orient the Right Upright
Spacer (91) with the two curved corners posi-
t
ioned as shown.
Insert the Upright Wire (85) through the Right
Upright Spacer (91) as shown. Set the Right
Upright Spacer on the Base (94).
85
91
3
91
Curved
Corners
4. Identify the Right Upright (83) which is marked
with a “Right” sticker.
Have a second person hold the Right Upright
(83) near the Base (94). See the inset drawing.
Tie the wire tie in the Right Upright securely
around the end of the Upright Wire (85). Then,
pull the other end of the wire tie until the Upright
Wire is routed completely through the Right
Upright.
94
Wire Tie
85
83
4
Wire
Tie
83
85
94