NordicTrack NTL07007.2 Treadmill User Manual


 
22
THE INFORMATION MODE
T
he console features an information mode that keeps
track of the total distance that the walking belt has
m
oved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select a measurement system of miles or kilome-
ters, and to turn on and off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The display will show the total
number of hours the treadmill
has been used.
The display will also show the
total number of miles (or kilo-
meters) that the walking belt
has moved.
An “E” for English miles or an
“M” for metric kilometers will
appear in the display. Press
the Speed increase button to
change the unit of measure-
ment if desired.
Note: The console features a
display demo mode, de-
signed to be used if the
treadmill is displayed in a
store. While the demo mode
is turned on, the console will
function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al
-
though the buttons will not function.
If the demo mode
is turned on, a “d” will appear in the display while the in-
formation mode is selected. To turn on or off the demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
A
n optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.
T
o purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.
HOW TO ADJUST THE CUSHIONING SYSTEM
Remove the key from the console and unplug the
power cord.
The treadmill features a cushioning sys-
tem that reduces the impact as you walk or run on the
treadmill. To increase the firmness of the walking plat-
form, step off the treadmill and slide the platform cush-
ions toward the front of the treadmill. To decrease the
firmness, step off the treadmill and slide the platform
cushions toward the back of the treadmill. Note: Make
sure that both cushions are set at the same firm-
ness level. The faster you run on the treadmill, or
the more you weigh, the firmer the walking plat-
form should be.
Platform
Cushion
Walking Platform
Increase
Decrease
Platform
Cushion