Filter
Top Products
19
relative angles between these positions cannot be changed, the
starting point can be adjusted by screws (3, Fig.6). If you loosen
them, you can rotate the flip-flop mechanism to find the suitable
starting point. Tighten the screws (3, Fig.6) after the adjustment.
You can raise the unit for unobstructed view without taking the
helmet off. To do so press (and hold) the button (2, Fig.6) and
rotate the unit until you hear a click.
All other operations with the unit mounted on a helmet are
identical to those with the headgear.
6.15 Mounting on a rifle
The unit can be mounted on a rifle with Picatinny mount adapter
(MIL-STD-1913). The optical axle of the monocular coincides
with the rifle’s Picatinny rail.
Two types of weapon mount adapters are available – Fig.7 and
Fig. 8. Either adapter enables mounting the unit to the Picatinny
rail. The type shown on Fig. 7 has two screws with large grooved
heads for convenient tightening.
Note: Over tightening the screws may damage the thread.
FIGURE 7. NVS 14-
3GCS with Picatinn
y