Filter
Top Products
18
FIGURE 6. Helmet mount
1. Locking screw
2. Flip/flop button
3. Flip-flop adjusting screws
4. Mount binding screw
1
2
3
4
6.14 Using the helmet mount
The unit can be equipped with an optional helmet mount.
This mount can be customized to fit a wide range of
existing helmet models.
The mount is attached to a helmet with straps.
The unit is fixed to the mount by the locking screw (1,
Fig. 6). To adjust the position of the unit to your eye level
use the screw (4, Fig. 6). To adjust the eye relief first
loosen the locking screw (1, Fig.6) and set a comfortable
distance between the eyes and the eyepiece; then tighten
the locking screw back.
You can fixate the unit in three predetermined positions: vertical,
horizontal, and 15-20 degrees above horizontal. Although the