Filter
Top Products
17
Using the camera / video adapter
Before using the (optional) adapter,
remove the rubber eyepiece carefully.
The adapter (Fig. 5) consists of 2 rings:
a) Camera adapter is 52x0.75mm. It
fits the filter lens thread of various
cameras, e.g. Nikon.
b) Video adapter is 37x0.75mm. It
fits Sony cameras and some others.
If our adapter does not fit your camera from a camera supply
store, obtain proper step up / step down rings.
Using the helmet mount
The Unit can be equipped with an optional NVS H Mount
which fits a variety of existing helmet models.
The Unit is fixed to the mount via a locking screw (1, Fig.
6). To adjust the position of the Unit to your eye level, use
the mount binding screw (4, Fig. 6). To adjust the eye
relief first loosen locking screw and set a comfortable
distance between the eyes and the eyepiece; then tighten
the locking screw.
The Unit can be fixed in three predetermined positions: vertical,
horizontal, and 15-20° above horizontal. Although the relative
angles between these positions cannot be changed, the starting
point can be adjusted using the flip-up adjustment screws (3, Fig.
6). If you loosen them, you can rotate the flip-up mechanism to
FIGURE 5
Camera / Video adapter