Filter
Top Products
13
FIGURE 3
1. “Swing arm” mount
2. Grooved pad
3. Locking knob
4. Unit groove
5. Flip button
6. US clip mount
Using the Unit with headgear or helmet
The Unit is supplied with headgear designed to allow the
mounting of the Unit on the head. Prior to using the headgear
adjust its straps so that the headgear fits the head comfortably but
firmly and does not slide off during movement.
The Unit is attached to the headgear with a swing arm mount (1,
Fig. 3). To attach the arm mount to the headgear loosen the
tightening screw on headgear, slide helmet groove (2, Fig. 3)
onto the rail, and then tighten the screw.
To attach monocular to the arm turn the knob (3, Fig. 3), slide the
arm groove (4, Fig.3) along the dovetail platform of the
monocular (8, Fig. 1), and then release the knob.
Technical
drawing of US
cli
p
moun
t
3
1
6
5
2
4