Filter
Top Products
19
Gating mode
In this mode gating function is activated: here user can set
the minimal distance to the target, any object closer than
the gating distance will be ignored.
To select Gating Mode:
Select GAtE from main menu
Minimal gating distance of 0 meters (display: 000 m) will
be initially set, further pressing M button will increase
gating distance by 100 m up to 3,900 m. When the
desired distance is reached – select it by pressing Action
button.
OVER 100M – indicates that gating is active
To deactivate gating choose gating value zero.
Note: The gating distance can only be increased. To exit
the gating selection cycle without setting any gating
distance click through full gating range with M button or
hold M button for 2 seconds.
Gating feature helps measuring remote targets in
unfavourable atmospheric and environmental conditions
by eliminating reflections from snowflakes, raindrops,
industrial wires, tree branches, etc. At the same time, if
gating distance is set incorrectly, you can remove the
desirable object from measurement range.