Filter
Top Products
14
Step 8: Cut red tie strap and roll out of box
Step 9: Plug the power cord in and turn the treadmill on
Step 10: Install safety key
Step 11: (TR1200i only) Set Time and Date
power receptacle
red tie strap
Step 8
Step 9
See Moving and Storage on page 32
3.0
MPH
4.0
MPH
5.0
MPH
6.0
MPH
safety key
To set your consoles time and date,
follow these steps:
1. Remove the safety key and re-install
2. Press any of the quick speed buttons for 3
seconds to initiate the date and time set up
mode.
3. Press the UP / DOWN buttons to set the correct
YEAR, Press Enter
4. Press the UP / DOWN buttons to select the
correct MONTH, Press Enter
5. Press the UP / DOWN buttons to select the
correct DAY, Press Enter
6. Press the UP / DOWN buttons to set the HOUR,
Press Enter
7. Press the UP / DOWN buttons to set the
MINUTES, Press Enter