Filter
Top Products
Step 7 Assemble Front Base Shroud; Console Bracket to the Upright
Parts: Hardware Bag #5 (8, 12mm SIlver Phillips Head Screws)
(2, M10 x 15mm Silver Hex Head Bolts)
Tools: Phillips Screwdriver, 17mm Socket Wrench
Position the left side base shroud (N) over the metal bracket (O)
and screw in with four 12mm Silver Phillips Head Screws (12).
Repeat for the right side base shroud.
Slide the console bracket (P) into the upright. Use two M10 x
15mm Silver Hex Head Bolts (13) to attach the console bracket to
the upright.
15