Filter
Top Products
36
WHEN ACTIVITY ZONE WAKES UP THE STRIDE CHANGES
When the activity zone wakes up from sleep mode the stride length adjust to the last stride position used before sleep
mode was entered. Sleep mode is a setting that turns the display backlight off to save power and LCD life. It is preset to
5 minutes. If you would like the display to always be turned on sleep mode can be turned off in the settings menu.
ACTIVITY ZONE DISPLAYS E5
One of the keys on the activity zone is stuck in the pressed-in position. Check to see if you can dislodge the Leg
Sculptor, Stride Up, or Stride Down key. If the key is dislodged E5 will disappear.
ACTIVITY ZONE DISPLAYS SETTINGS AND WON'T WORK
You have accessed the settings menu. To exit the settings menu press the Leg Sculptor Key until settings has
been exited.
ACTIVITY Z
ONE DISPLAYS STRANGE INFORMATION IN THE DIGITAL DISPLAY
You may have accessed the settings menu or diagnostics menu. To exit both menus continue to press the Leg Sculptor
key until the menu is exited.
NOISE FROM PEDALS
Some noise from the pedals is normal. It will vary depending on the weight of the user. Check accessible hardware
beneath pedal to make certain it is tight.
CAN'T FEEL THE PEDAL CUSHIONING
The cushioning in the pedals is located beneath the front of the pedal. The pedals are designed to deflect a ½ inch.
Depending on your weight the pedals will flex differently. It may be difficult to feel the deflection during a workout
because of your movement.