Filter
Top Products
8.SERVICE & PRODUCT MAINTENANCE
8.1 TROUBLESHOOTING
NO POWER
Check to see that the power cord is fully plugged into the back of the cross-trainer and into the wall. Make sure the
power switch is turned on and that the power cord is fully seated into the back of the cross-trainer.
HAND PULSE SENSORS NOT WORKING OR NOT ACCURATE
Hand pulse sensors can work differently with different body types. With some individuals it can be very difficult to extract
a heart rate reading. Follow the below tips to improve the heart rate reading.
• Remove your hands from the heart rate sensors and wait for the heart rate display to clear.
Grasp sensors again.
• Make sure hands are fully contacting the sensors.
• Dry hands periodically during use.
• Limit movement.
• Clean hand pulse sensors.
•
May need to wait longer for heart rate to display.
Note: The heart rate hand pulse sensors provide an approximate heart rate value. The sensors are not medical devices
and should not be used in any type of medical application.
Warning: Chest strap heart rate reading overrides contact heart rate.
34