Filter
Top Products
9
1.2 S
ETUP
Read the Operation Manual before setting up the Life Fitness treadmill. Place the treadmill where it will be used
before beginning the setup procedure.
E
LECTRICAL
P
OWER
R
EQUIREMENTS
The Life Fitness Treadmill is intended for use on a normal 120-Volt electrical circuit in the United States and
Canada. The following table provides the current rating for this product based on supply voltage. Make sure that
this treadmill model supports the proper line voltage for the installation location before plugging into the outlet.
Supply Voltage
(VAC)
Frequency (Hz) Maximum Current
(Amps)
120 50 / 60 12
230 50 / 60 6.3
240+ 50 / 60 6.0
G
ROUNDING
I
NSTRUCTIONS
This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down, proper grounding
provides a path of least resistance for the electric current, which reduces the risk of shock to anyone touching or
using the equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding
conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and
grounded in accordance with all local codes and ordinances.
A temporary adapter MUST NOT BE USED to connect this plug to a 2-pole receptacle in North America. If a
properly grounded, 12 AMP outlet is not available, a qualified electrician must install one.
DANGER: A risk of electrical shock may result from improper connection of the equipment-grounding conductor.
Check with a qualified electrician if in doubt about proper grounding technique. DO NOT modify the plug provided
with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician.
DANGER : Tout branchement incorrect du conducteur de mise à la terre de l’appareil peut causer un risque de
décharge électrique. Consulter un électricien qualifié en cas de doute sur la technique de mise à la masse. NE
PAS modifier la fiche de l’appareil. Si elle ne s’adapte pas sur une prise électrique, faire installer une prise correcte
par un électricien qualifié.