Filter
Top Products
4
UNPACKING THE TREADMILL
1. Carefully cut and remove the SHIPPING BANDS.
2. Carefully disengage the staples securing the TOP
TRAY.
3. Lift the TOP TRAY upward and off of the BOTTOM
TRAY.
4. Remove the TOP SPACERS, DISPLAY CONSOLE
BOX and UPRIGHTS.
5. Remove the remaining packaging from the deck of
the TREADMILL.
Caution: The TREADMILL should be assembled
before removing it from the BOTTOM SHIPPING
TRAY. Follow the ASSEMBLY INSTRUCTIONS
on the opposite page before proceeding.
6. From the rear of the TREADMILL, tilt the BASE
upward until it locks upright.
7. Tear the front end of the BOTTOM SHIPPING TRAY
at the corners and fold the flap downward.
8. Carefully roll the TREADMILL forward and off of the
BOTTOM SHIPPING TRAY.
9. Carefully roll the treadmill near the desired location
for use.
10. Unfold the treadmill: Stand directly behind the tread-
mill. Support the treadmill base with the right hand,
and pull and hold the release handle downward with
the left hand. The handle is located on the end of the
left main frame. Begin lowering the base a short dis-
tance. Let go of the release handle and, with both
hands, guide the treadmill deck down to unfold it.
Caution: As the treadmill comes closer to the
ground, it lowers at a faster rate and feels
heavier.