Filter
Top Products
9
STEP 2:
LOOSELY assemble the REAR CROSS BRACE (9) to the bottom of the LOWER LEFT BASE (2) and LOWER
RIGHT BASE (8) using four 1/2 X 4-1/2” BOLTS (3), four BACKING DOME WASHERS (4), four 1/2” INT TOOTH
LOCK WASHERS (5) and four 1/2” LOCK NUTS (6).
LOOSELY assemble the PULL-UP SUPPORT (10) to the top of the FRONT LEFT UPRIGHT (1) and FRONT RIGHT
UPRIGHT (7) using four 1/2 X 4 1/2” BOLTS (3), four BACKING DOME WASHERS (4), four 1/2” INT LOCK WASH-
ERS (5) and four 1/2” LOCK NUTS (6).
3
4
5
6
10
1
7
5
6
9
3
4
2
8