Filter
Top Products
14
STEP 6:
Assemble the SHORT BENCH LOCK (19) to the REAR CROSS BRACE (9) using two 1/2 X 3-1/2” BOLTS (20), two
BACKING DOME WASHERS (4), two 1/2” INT LOCK WASHERS (5), and two 1/2” LOCK NUTS (6).
Insert the LEFT BAR SUPPORT (21) into the desired slots of the FRONT LEFT UPRIGHT (1), and allow it to drop
down to lock in place.
Insert the RIGHT BAR SUPPORT (22) into the desired slots of the FRONT RIGHT UPRIGHT (7), and allow it to drop
down to lock in place.
Insert one BAR CATCH (23) into the desired slots of the FRONT LEFT UPRIGHT (1), and allow it to drop down in
place.
Insert the remaining BAR CATCH (23) into the desired slots of the FRONT RIGHT UPRIGHT (7), and allow it to drop
down in place.
Securely tighten all loose assemblies.
21
23
19
5
6
9
20
4
1
7
22