Filter
Top Products
15
STEP 7:
Spotter Platform accessories are available for the HDMR8.
Assemble each Spotter Platform (A) to the FRONT LEFT & RIGHT UPRIGHTS (1 & 7) using two BOLTS (B), two
DOME WASHERS (C), two SPACERS (D), one WEAR PLATE (E), two FLAT WASHERS (F), and two NUTS (G) as
shown in the illustration.
NOTE: All necessary hardware for the Spotter Platform assembly is included with the accessory.
Make sure the flange on the SPACER (D) faces the inside of the rack.
A
C
B
F
1
E
D
G
A
7