Filter
Top Products
STEP 9
Connect the pedal levers to the upper arms:
1. Insert pedal lever (L) into the clevis bracket (M) of the upper
arm (N).
2. Connect the pedal lever (L) to the upper arm (N) using one (#5)
3 1/4" bolt and one (#6) high profile nylock nut. Using a 9/16"
socket wrench, and a 9/16" open ended wrench, tighten
securely.
3. Repeat procedure for the opposite side.
STEP 10
Attach the clevis covers to the clevis brackets:
1. Secure one clevis cover (O) to the clevis bracket (M) using two
(#1) phillips tapping screws.
NOTE: Threads are formed in the holes as the screw goes in. A
power screw-driver is recommended if available.
2. Repeat procedure for opposite side.
17