Filter
Top Products
TOWER
BRACE
X 4" BOLT
(EXISTING)
FIGURE 5
STEP 5:
Place TOWER BRACE over the GUIDE RODS (2) and securely fasten TOWER. BRACE to TOWER
using previously remow~d 1/2" X 4" BOLTS, 1/2" WASHERS, AND 1/2" NUTS as shown in FIGURE 5.
TOWER
BRACE
,TOP BOOM
CABLE’
FIGURE 6
STEP 6:
Route threaded end of CABLE (part # 6671601) around pulleys in TOP BOOM and PULLEY BLOCK
ASSEMBLY. Route CABLE (part # 6671601) down through hole in TOWER and TOWER BRACE
shown in FIGURE 6.