Filter
Top Products
12
3.8 ASSEMBLE FRONT BASE COVER; CONSOLE BRACKET TO THE UPRIGHT
Parts: Hardware Bag #5 (2, M10 X 15mm Silver Hex Head Bolts)
Tools: Phillips Screwdriver, 17mm Socket Wrench
Position the front base cover (U) over the main bracket (V).
Align the four tabs on the front base cover with the four
hole on the main bracket. Snap into place.
Slide the console bracket (W) into the upright. Use two
M10 X 15mm Silver Hex Head Bolts (X) to attach the con-
sole bracket to the upright (Y).
Note: Avoid pinching the console wires.
U
V
W
Y
X