Filter
Top Products
3.2 PACKAGING
Parts: None
Remove all packaging and place main components to the side of the box. Break box down in each of the four corners.
3.3 ASSEMBLE THE STABILIZER
Parts: Hardware Bag #1 (2, M10 X 15mm Silver Hex Head Bolts)
Tools: 17mm Socket Wrench
Assemble the stabilizer tube (foot) (A) to the bottom base bracket (B) of the product using two M10 X 15mm Silver Hex
Head Bolts (C).
3.4 ASSEMBLE THE CONSOLE UPRIGHT
Parts: Hardware Bag #2 (3, M10 X 70mm Long Silver Hex Head Bolts)
(1, M10 X 20mm Clear Zinc Hex Head Bolt)
Tools: 17mm Socket Wrench
The console upright tube (D) is pre-assembled with one bolt so that
you can simply lift the upright into place by pivoting upward. Hold the
upright in place and install three M10 X 70mm Long Silver Hex Head
Bolts (E) into the side of the main bracket (F). Install one M10 X
20mm Clear Zinc Hex Head Bolt (G) into the front of the bracket.
CAUTION: Do not pinch wires when assembling the upright.
3.5 CONNECT BASE WIRING
Parts: None
Connect the two plugs (H) at the base of the upright.
9
C
B
A
H
D
E
F
G
F