Filter
Top Products
FOLDING AND UNFOLDING THE TREADMILL
The treadmill’s deck can be folded up when not in use. To do so, make sure that the incline is set to 0%, then simply
grab the deck and lift it until it locks into place. To lower the deck again, push the running surface in with one hand and
pull the release handle to slowly lower it to the ground. Make sure the deck is completely lowered before using the
treadmill.
POWER SWITCH
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions - "I" (one) for ON and "0"
(zero) for OFF.
MOVING THE TREADMILL
Turn the treadmill off and disconnect its power cord, then raise its deck.
Note: If adjustments were made to the front levelers during setup, make sure to tighten the levelers snug against the
base frame before moving.
The treadmill may now be moved on its front platform wheels by pushing and pulling on its handrails. Do not attempt to
move the treadmill by pushing or pulling on the deck or deck support tubing.
IMMOBILIZING THE TREADMILL
When it is necessary to immobilize the treadmill, press and hold both the SPEED DOWN ARROW and the STOP keys
on the activity zone. Use the same key sequence to mobilize the treadmill.
14