Filter
Top Products
STEP 3:
FIGURE 3
• Remove and discard one 2” SQ. END CAP from the end of the UPRIGHT FRAME as shown in FIGURE 3.
• Slide the CARRIAGE off the UPRIGHT FRAME and discard as shown in FIGURE 3.
4
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
STEP 2:
FIGURE 2
• LOOSEN the TOP BOOM from the UPRIGHT FRAME by removing one 1/2 X 2-1/2” BOLT, one 1/2 X 3” BOLT, one 3/8 X 2-3/4” BOLT,
two 1/2” WASHERS, one 1/2” LOCK NUT, and one 3/8” LOCK NUT as shown in FIGURE 2.
3/8 X 4”
3/8 X 2-3/4”
1/2 X 2-1/2”
TOP BOOM
UPPER
CROSS
SUPPORT
UPRIGHT FRAME
• LOOSEN the TOP BOOM from the UPPER CROSS SUPPORT by removing two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8”
LOCK NUTS. See FIGURE 2.
1/2 X 3”
2” SQ. END CAP
CARRIAGE
UPRIGHT FRAME
• REMOVE TOP BOOM.