Life Fitness 8235 Home Gym User Manual


  Open as PDF
of 15
 
FIGURE 19
15
STEP 19:
• Screw the treaded end of the CABLE (23) approximately 3/4” into the end of the WEIGHT STACK SHAFT (19) and tighten jam nut
securely. See FIGURE 19.
• If the HEAD PLATE (20) does not sit on top of the first WEIGHT PLATE (17), push the head plate down, insert the SELECTOR PIN
(48) and perform several repetitions on the machine. This will relax the cable system and prevent the HEAD PLATE (20) from lifting up.
• If after completing the previous step the HEAD PLATE (20) still does not sit on top of the first WEIGHT PLATE (17) or if there is
excess slack in the cable system, adjust the threaded end of the CABLE accordingly and retighten the jam nut.
23
19
48
20
17
1
Thank you for purchasing the LifeFitness 8235 LEG EXTENSION/LEG CURL. If unsure of proper use of equipment, call
your local LifeFitness distributor or call the LifeFitness customer service department at (800) 328-9714.
 previous