STEP 6:
FIGURE 6
7
STEP 7:
FIGURE 7
25
16
• SECURELY assemble SEAT PAD (16) to
the PAD SUPPORT (7) using two 3/8 X 1-
1/4” BOLTS (21) and two 3/8” WASHERS
(25) as shown in FIGURE 6.
• Pull back on SPRING PIN and slide PAD SUPPORT (7) over square tube on SEAT SUPPORT (6) as
shown in FIGURE 7.
• SECURELY assemble the 3/8” SPRING PIN (29) to the SPRING PIN HOUSING on the SEAT SUP-
PORT (6) as shown in FIGURE 7.
3/8 X 1-1/4” 20
7
6
29
7