Filter
Top Products
11
STEP 9:
• Slide one 1-1/2” THRUST BEARING (25), one RIGHT SAFETY HOOK (6), and one 1” SHAFT COLLAR (24) over the
SAFETY STOP (2) as shown in FIGURE 9.
FIGURE 9
FIGURE 10
• Slide one 1-1/2” THRUST BEARING (25), one LEFT SAFETY HOOK (5), and one 1” SHAFT COLLAR (24) over the
SAFETY STOP (2) as shown in FIGURE 9.
LEFT
RIGHT
STEP 10:
• Slide one BAR STOP (8) over each BEARING HOUSING (1) as shown in FIGURE 10.
• Using a 3/16” Allen wrench, tighten each set screw on the 1” SHAFT COLLARS (24). See FIGURE 9.
2
24
25
5
24
6
25
2
1
8
1
8