Filter
Top Products
5. MAINTENANCE PROCEDURES
ACTION DAILY MONTHLY BI-ANNUALLY YEARLY AS
NEEDED
CLEAN
Upholstery
X
Guide Rods
X
Shields
X
Hand Grips
X
Frames (Wax)
X
INSPECT
Paint
X
Cable
X
Hardware
X
Frame
X
Hand Grips
X
CLEAN
• Upholstery with a mild soap and water.
• Guide rods with a cotton cloth and break-free.
• Hand grips with mild soap and water.
• Wax frames with a standard, non-abrasive, wax finish.
INSPECT
• Cables for wear or damage and proper tension (should not exceed ¾” deflection). Pay
close attention at bends and attachments points.
• Hardware should be checked for looseness. Tighten as required using metric tools.
• Frames should be inspected for wear or damage.
• Handgrips should be checked for wear or damage.
• All paint chips should be filled immediately with touch-up paint.
LUBRICATE
• Guide rods with Silicone Compound (part number 3238401). Apply the lubricant to a
cotton cloth, then run the cotton cloth up and down the guide rods as needed.
5-1