Filter
Top Products
E25 / E55 Elliptical
6
STEP 2: HANDLE BAR ASSEMBLY
1. Ins tall the 2 pc s of 1 7m/m Wave Was h ers o nto the Le ft and Right s ide of the
Handle Bar axle.
2. Slide the Left and Right Handle Bars onto the appropriate side of the axle.
3. Put the 2 pcs of 5/16" x 23 x 1.5T Flat Washers onto the 2 pcs of 5/16" x 15m/m
Hex Head Screws and install, and tighten, in the threaded holes in the ends of the
axle.
STEP 3: CONNECTING ARM ASSEMBLY
1. Align the hole in the end of the Connecting arm (L)(pivoting rod end) with the hole
in the bracket of the Handle Bar (L). The rod end should be on the inside of the
Handle Bar (L) bracket. Take 1pc of 5/16" x 1-1/4" Hex Head Screw and install it
through the Handle Bar (L) bracket and the rod end. Install 1pc of 5/16" x 20 x
1.5T Flat Was her, 5/16 " x 7T Nylon Nut and11 .9 x 8.5 x 16 m/m S le ev e Spa c er
on the 5/16" x 1-1/4" Hex Head Screw and tighten firmly using a 12m/mWrench
on the 5/16" x 7T Nylon Nut and one on the 5/16" x 1-1/4" Hex Head Screw.
2. Repeat for the right side Pedal /Connecting Arm.
STEP 4: PLASTICS ASSEMBLY
1. Install the Connecting Arm Covers (L)(R) over the connection of the rod end and
Handle Bars with 4pcs of M5 x 15m/m Button Head Socket Screws and 2pcs of
3. 5x1 0m/m S elf Tapping S c rew by u s ing th e Sh ort Phillips S c re w Driver.
2. Install the 2pcs of Wheel Covers using the 4pcs of M5x15m/m Phillips Head
Screws.
3. Locate the 2 pcs of Rear Stabilizer Cover and 2 pcs of Middle Stabilizer Cover for
the Rear Rail Assembly and install with 4 pcs of M5 x 15m/m Screws by using the
Phillips Head Screw Driver.
Then install front stabilizer cover with 2 pcs of M5 x 15m/m Screws by using the
Phillips head screwdriver.
4. Install the Front Handle Bar Cover (L & R) and Rear Handle Bar Cover (L & R)
over the Handle Bars axle con nections with the 6 pc s of3.5x10m/m Self
Tapping Screws by using Phillips Head Screw Driver.
PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS HAVE
BEEN ASSEMBLED.
Transportation
The elliptical is equipped with two transport wheels which are engaged when rear of the
Elliptical is lifted.