Filter
Top Products
7
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Attach the bottomof Vertical Frame (#8) to the bracket on the Rear
Stabilizer (#3). Secure the Vertical Frame to the Rear Stabilizer with two
M10 x 20 Hex Bolts (#35) and Washers Dia10 (#39). Secure the Vertical
Frame (#8) to the Cross Brace (#4) with two M10 x 70 Carriage Bolts
(#36), one 5 1/8”x 2 ¾”Bracket (#19), two Washers Dia10 (#39), and
M10 Aircraft Nuts (#38).
Attach a Bumper (#28) onto the lower Vertical Frame (#8).
STEP 2 Cont.
Assembly