Filter
Top Products
15
www.keystness.com
D
F
A34
A33
D1
ASSEMBLY FOR CONSOLE
Step 1:
Connect the sensor wire (A34) and pulse wire
(A33) with the corresponding wires on the con-
sole (F).
Step 2:
Remove the screws (D1) that are preinstalled on
the back side of the console.
Step 3:
Gently push all wires into the upright post and
mount cosole (F) by sliding onto the console
mounting plate at the top of the upright tube (D).
Secure using 2 screws (D1).
9
Assembly