Filter
Top Products
9
www.keystness.com
E2
E3
N3
N2
A10
A8
N9
A
E
N7
Assembly
3
ASSEMBLY FOR UPRIGHT POST
Step 1:
Insert the upright post cover (N9) to the upright post (E)
from the bottom side.
Step 2:
Connect the lower pulse wire (A10) with the upper pulse
wire (E2). Also, connect the lower sensor wire (A8) with
the upper sensor wire (E3).
Step 3:
Attach upright tube (E) to the front main frame (A).
Then, secure them with 3 allen screws (N7), 3 spring
washers (N2) and 3 flat washers (N3).
Step 4:
Slide the upright tube cover (N9) down to conceal tube
connection.
Note:
Be careful not to pinch the sensor wire connection
during assembly.