Filter
Top Products
www.keystness.com
8
B
A
B20
A10
N7
C
N2
N3
N1
N2
N3
Assembly
ASSEMBLY FOR FRONT & REAR MAIN FRAME
Step 1:
Connect the front (A10) and rear (B20) pulse wires together.
Step 2:
Attach front (A) and rear (B) main frames together, making sure all wires
are lined up correctly so that they are not pinched when assembling the
two frames together. Then, secure the frame connection at the top and
the 2 sides using 4 allen screws (N1), 4 spring washers (N2) and 4 flat
washers (N3).
ASSEMBLY FOR FRONT STABILIZER
Secure the front stabilizer (C) to the main
frame (A) using 2 allen screws (N7), 2
spring washers (N2) and 2 flat washers (N3)
Note:
After you finish the assembly for front and rear stabilizer bars in order to add stability to
the unit, you may need to adjust the levelers that are located on the bottom of the unit.
Use Tool
6mm