Filter
Top Products
5
Assembly: Parts Identifier
The Healthtrainer HT-740T Treadmill will require assembly before operating. Place
unopened box on a clean, level surface. After opening the box, remove any packing material
from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call 888-340-0482.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench- 3/16”
2. Allen Wrench- 7/32”
3. Phillips Screwdriver
U1T1
UAT4
UAT5
UAD1
UAS29
UAS30
UAJ24
UAJ5
UAJ27
UAW8 UAW9 UAW10
UAJ28
UAJ7
UAT6
UAT7
Ref # Description Qty Ref # Description Qty
U1T1 MAIN FRAME 1 UAJ24 SCREW ST4.2*12 6
UAT4 LEFT UPRIGHT 1 UAJ5 BOLT M10*25 12
UAT5 RIGHT UPRIGHT 1 UAJ7 BOLT M8x50 4
UAD1 CONSOLE 1 UAJ28 FLAT WASHER 8 6
UAS29 LEFT PROTECTION COVER 1 UAJ27 FLAT WASHER 10 12
UAS30 RIGHT PROTECTION COVER 1 UAW8 #6 ALLEN WRENCH 1
UAT6 LEFT HANDLEBAR 1 UAW9 #5 ALLEN WRENCH 1
UAT7 RIGHT HANDLEBAR 1 UAW10 WRENCH W/SCREW DRIVER 1