Filter
Top Products
42
4
18
63
55
FIGURE 7
Step 1:
Insert the pulse wires (63)
into the bigger opening on
the upright tube and pull
them out from the top of the
upright tube (42). Attach
the handlebar (55) to the
handlebar post (42) with fixed
screws (18) and washers (4).
Assembly
10
Congratulations!
You have completed assembly of your new HT440U Upright!
Figure 7
54
63
41
FIGURE 8
Step 1:
Open the battery cover on the
back of the console (54), and
install 2 AA batteries.
Connect the male end of
the extension wire (41) and
the pulse cables (63) to the
console (54). Attach console
(54) onto the upright post by
sliding into place.
Figure 8