Filter
Top Products
10
Figure 9
Locate bag labeled Figure 9. Connect the
pulse wires coming from the pulse handle-
bar assembly to the pulse wires from the
console. Secure pulse handlebar assembly
to console tube using six M6*10 hex socket
head bolts. Insert toggle wire into the tog-
gle jack located on the console tube.
Note: Ensure that all wires are secure
inside console tube. Be careful not to pinch
wires.
Figure 9
Figure 8
Locate Console. Connect upper console
wire and pulse wires to the appropriate
location on the back of the console. Secure
console to console tube using four screws.
Note: The four console screws will already
be installed into the back of console when
you remove it from the box.
Figure 8
Assembly
M6*10 HEX SOCKET BOLT
PULSE WIRE
TOGGLE WIRE
TOGGLE WIRE
JACK
PULSE HANDLEBAR
ASSEMBLY
CONGRATULATIONS!
You have completed assembly of your E-CZ200 Elliptical.