FIGURE 16
NOTE: Be careful of the SIDE PANEL wires while you place the TOP PANEL. The heater cables fit into
cut outs aligned to the TOP PANEL (Figure 16). Failure to do so could damage the wires.
3. Feed the control cable and CD connections down from the TOP PANEL through the long-shaped hole into
the inside room. (Figure 17 & 18)
FIGURE 17 FIGURE 18
4. Connecting the plugs on the TOP PANEL
1> Plug in according to the respective mark. (Figure 19-23)
2> Connect the CTRL plug from the CONTROL BOX to the CTRL plug from the CONTROL PANEL, then
screw on. (Figure 24)
3> Plug the buzzer. (Figure 25)