Filter
Top Products
12
Owner’s Manual
SPEED ADJUSTMENTS
A single press of FAST and SLOW buttons will adjust speed by increments of 0.1 MPH (or Km/H)
during workout…or you may press and hold these buttons to quickly scroll up or down.
ELEVATION ADJUSTMENTS
For safety reasons, the elevation level is designed to be manually adjusted for most applications.
The treadmill will only automatically adjust elevation during one of the following three programs:
P2 = elevation program, H-SE = HRC by speed and elevation, and H-E = HRC by elevation. You
will find more details in the “Preset Programs” section beginning on page 15.
Elevation may be manually adjusted even while the running belt is not moving, however, during
the program setup mode, elevation will not be adjustable.
PULSE FUNCTION
This treadmill features wireless heart rate monitoring, the most advanced technology to date for
accurate read out of your heart rate. For convenience, this treadmill is also designed to pick
up heart rate info via the contact sensors located on the horizontal handlebar. Treadmill will
look for wireless pulse signal first. If no wireless pulse signal is present, then treadmill will look
for the signal from contact sensors.
To use the wireless pulse monitoring system, you must wear the heart rate transmitter chest
strap. Place the contact surface next to your skin directly under your heart to pick up the pulse
signals from your heart. The heart rate transmitter strap is an optional purchase and not
included with this treadmill.
To use the contact heart rate, place your hands gently but firmly around the contact sensors on
the handlebars. Movements in the hands may cause difficulty for the treadmill to pick up the
signal properly. When signal is picked up, the LED light next to the pulse display window will
light up and flash to the rate of your heart beat.
Please note that some fibers used in clothes (e.g. polyester, polyamide) create static electricity
which may prevent reliable heart rate measurement. Also, note that mobile phone, television
and other electrical appliances form an electro-magnetic field around them, which may also
cause problems in heart rate measurement.
PAUSE FUNCTION
When STOP button is pressed during workout, the program is suspended. After the running
belt has come to a complete stop, display will count down from 03:00. During pause mode,