Kettler TX1 Treadmill User Manual


 
Owner’s Manual
9
III. HANDLING YOUR TREADMILL:
FOLDING THE TREADMILL
Folding and unfolding of this treadmill is made easy with the assistance of gas shock. After the
treadmill has come to a complete stop, it is important to make sure the elevation is lowered all
the way to the lowest level before folding the treadmill. The display console will indicate “0%
elevation” in the lower left window when positioned at the lowest level. With caution, fold up the
deck slowly with both hands. Fold the deck vertically upright until you hear a click, then the
folded deck is locked in place. Please note that if you failed to lower the elevation to the lowest
level (0% elevation) then the folding safety lock will not click nor lock in place. Be certain the fold
lock clicks and locks in place,
UNFOLDING THE TREADMILL
Pull out the lock pin on the upright post (L) with your left hand. At the same time, press the
deck slowly with right hand. Use both hands to bring the deck slowly to the ground. As the
deck gets closer to the ground, it will drop at a faster rate and feel heavier. Please handle with
caution.
MOVING THE TREADMILL
This treadmill is easy to move around safely.
To move the treadmill:
1. Turn power switch off.
2. Unplug the power cord.
3. Make sure the deck is at 0% grade elevation.
4. Fold the treadmill and make sure lock is engaged. You should hear a click to indicate
positive engagement.
5. Simply roll the treadmill on four wheels to the desired location.
STORING THE TREADMILL
For safety precaution, especially when you have children in the house, we recommend that you
follow these steps to keep the treadmill out of potential harm.
1. Turn off the power switch when you have finished workout.
2. Disconnect the plug from the wall socket.
3. Remove the safety tether key and store out of reach of children.