Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.
NOTE: It is strongly recommended two or more people assemble this machine to avoid
possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Base Frame (#5) to the Rear Base Frame (#6). Align the holes then secure them
with one 4 3/8” x 1 ¾” Bracket (#19), two M10 x 2 ½” Carriage Bolts (#38), two ∅ ¾” Washers
(#53), and two M10 Aircraft Nuts (#50).
B.) Attach the Rear Vertical Frame (#9) to the other end of Rear Base Frame (#6). Align the holes
then secure them with one 4 3/8” x 1 ¾” Bracket (#19), two M10 x 2 ½” Carriage Bolts (#38),
two ∅ ¾” Washers (#53), and two M10 Aircraft Nuts (#50).
DIAGRAM 1
4