Filter
Top Products
STEP 6 (See Diagram 6)
A.) Attach the Black Cable (#27), Red Cable (#25), and Blue Cable (#26) to three Small
Pulleys (#17). Attach the three Pulleys to the open bracket on top of the Bow Frame (#7).
Align the holes and secure them together with one M10 x 3 ½” Allen Bolt (#46) and ∅ ¾”
Washer (#53). Note: The plastic clips on the end of the Cables should be on the back of
the bracket facing the back of the machine.
B.) Pull the three Cables downward to the open bracket on the Rear Base Frame (#6). Attach
the Cables to three Small Pulleys (#17) then attach the Pulleys to the bracket. Align the
holes and secure them together with one M10 x 3 ½” Allen Bolt (#46) and ∅ ¾” Washer
(#53). Note: The Cables should be underneath the Pulleys and the Clips on the Cables
should be in front of the bracket facing the front of the machine.
C.) Repeat the Procedures A & B to install the other three Cables on the other side.
9